With these tricks you will be able to eliminate soap and encrustations in the joints of the tiles without effort

Are you looking for a natural and economical alternative for the complete cleaning of bathroom tiles? Found it!

He is about to end up run over, his mother saves him

Are you looking for a natural and economical alternative for the complete cleaning of bathroom tiles? Found it! Begin to say goodbye to the many chemicals you have accumulated so far.

The bathroom is one of the fundamental environments of our home and keeping it in good condition is important for our health and the well-being of our family. The water, humidity and condensation accumulated in this domestic space make it sensitive to the formation of mold and the presence of bacteria and dirt. Thankfully, these too can be eliminated naturally without much effort. (see also: An incredible trick to whiten tile joints)

The inside of the toilet is a den of gut bacteria and germs. According to a study published by the journal American Society for Microbiology, if we do not lower the toilet seat when flushing the toilet, the small droplets that are released by this action form an aerosol that carries the fecal matter bacteria to nearby surfaces, even reaching our own. floor tiles. For this reason, keeping them clean is not only an aesthetic factor, but also a hygienic and healthy one.

To choose how to clean the tiles, we must consider that not all are the same, not all types of dirt are the same and, consequently, they cannot always be treated with the same method. Here are some recipes and tips where, depending on the type of stain, the most suitable natural ingredients are used.

Bleaching the grout lines in the bathroom and more

One of the most annoying things when cleaning bathroom tiles is the dirt that settles in their joints. With these natural products and tips, not only will your tiles shine and remain streak-free, but their joints will whiten without much effort and without using products that are harmful to the environment and health:

Index

Sodium bicarbonate

Baking soda is now one of the most effective green cleaners around. Thanks to its astringent and antifungal action, it removes mold residues and neutralizes bad odors.

• Preparation: In a bowl, mix the baking soda with warm water until you get a thick paste.
• Use: Rub the baking soda paste to whiten the tile joints. Leave on for about 30 minutes and rinse.

Hydrogen peroxide

Also known as hydrogen peroxide, it is one of the most recommended products for whitening tile joints and other similar surfaces. In this case, we recommend mixing it with baking soda, to remove moisture stains and soap residue.

• Preparation: Combine the hydrogen peroxide with the bicarbonate to obtain a semi-solid paste.
• Use: Spread the preparation on the tile joints and rub it with a brush or sponge. Leave on for about 10 minutes and rinse with warm water.

In case the mold stains persist, apply some white vinegar after using the mixture of hydrogen peroxide and baking soda.

Vinegar alcohol (white vinegar)

Known as the natural detergent par excellence, white vinegar or (vinegar alcohol) is also one of the best allies for whitening tile joints. Thanks to its acetic acid content, it can dissolve mold and remove moisture stains.

• Preparation: Mix the white vinegar with warm water and store it in a bottle with spray mist.
• Use: Spray the detergent on the tile joints and leave it to act for 10 - 15 minutes. Next, scrub with a sponge or brush and rinse.

Citric acid

Citric acid is a component that helps stop the growth of mold and bacteria in tile joints. Its direct application not only removes dirt, but is also effective against limescale, stains and soap encrustations. Many prefer it to vinegar as it would pollute less at the same level of effectiveness (to learn more about it (Citric acid: how to use it and why to prefer it to vinegar in cleaning)

• Preparation: Dilute the citric acid in the water and store it in a bottle with a spray bottle.
• Use: wear gloves and pour the preparation directly on the joints. Leave on for a few minutes and then rub with a sponge.

Sodium Percarbonate

Sodium percarbonate is a detergent, stain remover, whitener and sanitizer not only on fabrics.

• Preparation: Dilute the sodium percarbonate with water until the mixture is not too liquid.
• Use: Apply the mixture on the joints and leave to act overnight and in the morning rub with a toothbrush and rinse.

vaporetto

The vaporetto is also a great ally for cleaning the joints in ceramic tiles. Thanks to the combination of steam and high temperatures, great results are achieved even in cases where the dirt seems adamant. Some steamers are already equipped with specific brushes for cleaning tile joints.

Attention, knowing the type of tiles to be cleaned is important. Steam and high temperatures could damage some types of tiles, such as terracotta and wax ones.

Try it! You will be amazed at the results and how the tile joints turn white again.

Read also:

• How to clean all types of floors without toxic substances
• Ecological cleaning: download the guide to self-produce household and laundry detergents
• How to clean the dishwasher: tips and tricks to eliminate bad smells
• How to clean kitchen appliances naturally
• Ecological laundry: the inevitable products to protect the environment and wallet