Do-it-yourself anti-mold. Mold is a problem that can occur quite easily in particularly humid environments
He is about to end up run over, his mother saves himLa mold it is a problem that can occur quite easily in particularly humid environments, such as the bathroom, or in poorly ventilated rooms. For prevent it, often change the air in the rooms by opening the windows and avoid water stagnating in the corners of the bathroom or on the shower curtain.
remove mold, try to avoid bleach, which is very polluting, and resort to simple natural remedies, such as tea tree oil, white wine vinegar or baking soda.
Here are some useful recipes for making your own DIY anti-mold.
Index
Hydrogen peroxide anti-mold
Take some water and dissolve in it 20% of Soda Solvay (or sodium carbonate), with this solution then wet the wall where there is mold with the help of a sponge or a brush. Instead, avoid spraying. Let it dry.
The next day wet the wall with hydrogen peroxide at 7% -8% (20 volumes) and let it act before cleaning everything and see that your wall is perfectly white and free from mold.
Read also: Hydrogen peroxide: 10 interesting uses for the home
Anti-mold with lavender essential oil
100 ml of food alcohol
15 drops of lavender essential oil
Alcohol and lavender essential oil help slow down the formation of mold and help to eliminate it, especially if the problem is not yet very extensive. This mold remover works especially well for hard surfaces such as bathroom tiles, and for shower curtains. Combine the two ingredients and apply them on the points to be treated with a spray, leaving it to act as much as possible. Remove mold with the help of a cleaning brush. Diffusing lavender essential oil with an essence burner helps prevent mold growth.
READ also: Lavender: beneficial properties and a thousand uses for health and beauty
Anti-mold with Tea Tree Oil
100 ml of white wine vinegar
15 drops of Tea Tree Oil
Il Tea Tree Oil, or Tea Tree essential oil, is among the most potent natural anti-mold. It can also be applied pure, in a few drops, to locally treat those areas where mold is already present. To be able to spray it on larger surfaces, combine it with white wine vinegar, another ingredient with strong anti-mold properties, which will allow you to avoid using bleach.
Read also: Tea Tree Oil: a thousand uses, properties and where to find it
Anti-mold with bicarbonate
50 grams of baking soda
10 drops of Tea Tree Oil
1 teaspoon of dish soap
Acqua
Combine the baking soda with dish soap and tea tree oil. Pour the ingredients into a small bowl and add water little by little, until you get one creamy pasta, easy to apply with the sponge. Here is a cleaning paste that you can use to scrub the resistant surfaces of the house, in order to remove the mold. The advice is to pre-treat the surfaces by spraying with vinegar and letting it act as much as possible, to rinse them and then rub them with the bicarbonate cleaning paste.
Also Read: 50 Amazing Alternative Uses Of Baking Soda
Anti-mold with grapefruit seed extract
2 teaspoons of grapefruit seed extract
2 teaspoons of Tea Tree essential oil
500 ml of tap water
THEgrapefruit seed extract it is an extraordinary natural anti-mold and bactericide, which is enhanced in its action when combined with Tea Tree Oil. Pour all the ingredients into a bottle of water, preferably with spray bottle. Shake before use and apply on the surfaces to be treated. Leave to act as much as possible and then rub with a rough cloth to facilitate the removal of mold.
Read also: Grapefruit seeds: properties, uses and where to find the extract
Anti-mold with essential oils
100 ml of white wine vinegar
100 ml of tap water
10 drops of lavender essential oil
10 drops of Tea Tree Oil
5 drops of lemon essential oil
This powerful mix of essential oils fit will facilitate the removal and disappearance of mold. The product is also useful for preventing its formation. It can be used from time to time to clean the most critical points, with particular reference to resistant surfaces in the bathroom and shower curtains. Combine all the ingredients in a spray bottle and shake before use.
Scented anti-mold
200 ml of tap water
200 ml of apple cider vinegar
15 drops of manuka essential oil
10 drops of cinnamon essential oil
Tea Tree Oil is very effective against mold, but unfortunately it has a very strong smell, which not everyone likes. For this you can replace it with manuka and cinnamon essential oil, which have antifungal properties and a more pleasant scent. Using apple cider vinegar instead of white wine vinegar helps to stem bad smells. Mix the ingredients, pour them into a spray bottle and shake before use.
READ also:
- Natural remedies for mold at home
- How to remove the mold from the shower curtain in a natural way
- La mold in food: when is it dangerous?